Eclipse Ide Neon

Posted on by admin

7) Open the eclipse folder. 8) Since Eclipse IDE does not have any installer, ther e will be a file inside the Eclipse folder named eclipse.exe. You can double click on the file to run Eclipse. Note:(This step is not required, but it’s strongly recommended.) Right-click the Eclipse Icon and press “Send To” - “Desktop (Create Shortcut).”. Under the Eclipse Console view, show the SonarLint Console, and optionally activate analysis or verbose logs. Use SonarLint with your team! SonarLint can be used together with SonarQube or SonarCloud, allowing your team to always be on the same page when it comes to Code Quality and Code Security. Before Eclipse Neon, full screen mode was only available in Mac OS. Now you can enjoy it for Windows and Linux too. When you need to maximize the amount of information visible on the screen, the full screen mode hides the title bar, taskbar and Start button in Windows, allowing you to focus your attention completely on the IDE content.

Install Eclipse and ABAP for Eclipse

The easiest way to install Eclipse 4.6 (Neon) or 4.5 (Mars) is to use the Eclipse installer. The installer is available on the Eclipse website. The ABAP Development Tools (ADT) require (at a minimum) Eclipse IDE for Java Developers. The installation steps are as follows:

You can Download the Eclipse installer here

  • Click On Download 64 bit.
  • Start the Eclipse Installer.
  • Select Eclipse IDE for Java Developers.
  • Accept the Eclipse Foundation Software User Agreement.
  • Wait for the installation to complete.
  • Start Eclipse using the LAUNCH button.
  • In the Workspace Launcher, accept the default workspace.
  • The Eclipse 4.6 (Neon) or 4.5 (Mars) installation is complete.

Eclipse will ask for a “Workspace” location when you start it for the first time. The workspace contains a collection of Eclipse specific resources. From the user’s perspective, there are three different types of resources: projects, folders, and files. All stored in the location you select during that first startup.


Select the Use this as the default and do not ask again checkbox to set the selected Workspace as the default location. If necessary this can later be changed via the path:
Window→ Preferences → General→ Startup and Shutdown→ Workspaces

The ABAP Development Tools (ADT) can be installed by adding a software repository. All of the Eclipse SAP tools are hosted on the website: https://tools.hana.ondemand.com . To add a new software repository in Eclipse, perform the following steps:

Choose Help→ Install New Software

EclipseEclipse

Choose Add

In the Add Repository window, enter a meaningful name and the location: https://tools.hana.ondemand.com/neon or https://tools.hana.ondemand.com/mars

Press OK.

Eclipse Neon Ide For C/c++ Developers

Now the new software repository is scanned for available software.

As soon as repository scan is finished, the Available Software is shown. To install the ABAP Development Tools (ADT), proceed with the following steps:

  • Select the ABAP Development Tools for SAP NetWeaver and choose Next.
  • Review the Installation Details and choose Next.
  • Accept the terms of the license agreements.
  • Press Finish to start the installation.
  • When the installation completes, restart Eclipse to finish the installation of the ABAP Development Tools (ADT).

By default, Eclipse will start with the Java development perspective, but this can be easily changed to the ABAP for Eclipse perspective. To open the ABAP for Eclipse perspective, perform the following steps:

  • Click the Open Perspective button.
  • Select the ABAP perspective.
  • Choose OK.

To make sure that the ABAP for Eclipse perspective is opened by default perform the following steps:

  • Select the Java Development button and open the context menu with a right mouse click.
  • In the context menu, choose Close.
  • Restart Eclipse to save these settings.
Eclipse

Eclipse Ide Neon Mac

Eclipse Ide Neon

The software used for the ABAP Development Tools (ADT) is available on different locations.Please use the following download locations as these are the official download locations.These download locations will contain the newest patch levels of the applications. Always check with your local IT department if you are allowed to install and use these tools.

  • Download Java SE8 JDK here
  • Download Eclipse IDE for Java Developers version 4.6 (Neon) here
  • Download Eclipse IDE for Java Developers version 4.5.2 (Mars 2) here
  • Download ABAP Development Tools (ADT) here

Note:

The Java SE8 JDK is required for running Eclipse 4.6 (Neon) and the SAP ADT tools. Download the latest Java SE8 JDK version without the NetBeans, the SAP ADT Tools use Eclipse as an Integrated Development Environment (IDE).

The ABAP Development Tools (ADT) don’t need to be downloaded separately, as you will configure Eclipse to use the correct URL https://
tools.hana.ondemand.com/neon or https://tools.hana.ondemand.com/mars
as a new software site.

Install Python and Java before installing Eclipse.

You may want to print these instructions before proceeding, so that you can refer to them while downloading and installing Eclipse. Or, just keep this document in your browser. You should read each step completely before performing the action that it describes. This document shows downloading and installing Eclipse on Windows 7 in Winter 2017.

Eclipse: (Neon)

The Eclipse download requires about 250 MB of disk space; keep it on your machine, in case you need to re-install Eclipse. When installed, Eclipse requires an additional 250 MB of disk space.

Eclipse Ide Neon 4.6

Downloading

  1. Click Eclipse

    The following page will appear in your browser. In this handout we will download Eclipse IDE for Eclipse Committers for Windows 32 Bit; if your computer uses Windows, continue below; otherwise choose either Mac Cocoa or Linux instead.

    It is critical that Java, Python, and Eclipse are either all 32 Bit or are all 64 Bit (and only if your Machine/OS supports 64 Bit): I think it easiest to use 32 Bit for everything.

  2. Click the 32-Bit (after Windows) to the right of the Eclipse IDE for Eclipse Committers.

    You will see the following page (don't worry about the name of the institution underneath the orange DOWNLOAD button).

  3. Click the orange DOWNLOAD button. The site named here, in orange to the right of the button: Canada - University of Waterloo Computer Science Clupb (http) is the random one chosen by the download page this time; yours may differ.

    This file should start downloading in your standard download folder, while showing a splash screen about donating to Eclipse. This file is about 250 Mb so it might take a while to download fully if you are on a slow internet connection (it took me about 5 minutes over a cable modem). Don't worry about the exact time as long as the download continues to make steady progress. In Chrome progress is shown on the bottom-left of the window, via the icon

    The file should appear as

    Terminate the window browsing the Eclipse download.

  4. Move this file to a more permanent location, so that you can install Eclipse (and reinstall it later, if necessary).
  5. Start the Installing instructions directly below.

Installing (for Python)

Python and Java should be installed before installing Eclipse
  1. Unzip eclipse-committers-newon-2-win32.zip, the file that you just downloaded and moved.
    On my machine (running Windows 7), I can
    • Right-click the file.
    • Hover over the IZArc command from the menu of options.
    • Click Extract Here

    If you do not have IZArc or an equivalent unzipping program, here is the web site to download a free copy of IZarc.

    Unzipping this file creates a folder named eclipse; unzipping 250 MB can take a few minutes. You can leave this folder here or move it elsewhere on your hard disk. I recommend putting the downloaded file and resulting folder in the C:Program Files directory.

  2. Create a shortcut on your desktop to the eclipse.exe file in this eclipse folder:
    On most Windows machines, you can
    • Right-press the file eclipse.exe
    • Drag it to the desktop.
    • Release the right button.
    • Click Create shortcut here

    Now you are ready to perform a one-time only setup of Eclipse on your machine.

  3. Double-click the shortcut to Eclipse that you just created above.

    The following splash screen will appear

    and then an Eclipse Launcher pop-up window will appear.

    In the Workspace text box, your name should appear between C:Users and workspace, instead of Pattis.

    Leave unchecked the Use this as the default and do not ask again box. Although you will use this same workspace for the entire quarter (checking projects in and out of it), it is best to see this Workspace Launcher pop-up window each time you start Eclipse, to remind you where your workspace is located.

    In fact, it is a good idea to create on your desktop a shortcut to your workspace folder; but you must click OK (see below) before Eclipse creates this folder and you can create a shortcut to it.

  4. Click OK.

    Progress bars will appear as Eclipse loads.

    Eventually the Eclipse workbench will appear with a Welcome tab covering it.

  5. Terminate (click X on) the Welcome tab.

    You will not see the Welcome tab when you start Eclipse again, after this first time.

  6. Click Help (on the far right of the line below this window's blue title Java - Eclipse) and then click Install New Software... in its pull-down menu, as shown below.

    The Install pop-up window will appear.

  7. Enter the text (or cut/paste from this document) http://pydev.org/updates into the Work with text box and press Enter (if that doesn't work, try http://www.pydev.org/updates).

    In a few seconds the information under Name should change from
    There is no site selected to Pending to

    Select only the top PyDev checkbox; do NOT select the PyDev Mylyn Integration (optional) box.
    Check before proceeding that the Install pop-up window appears as

  8. Click Next >

    A new Install pop-up window will appear.

  9. Click Next >

    A new Install pop-up window will appear.

    Select the I accept the terms of the license agreement radio button, so the window appears as

  10. Click Finish

    An Installing Software pop-up window will appear. During installation, it will show the various operations it is performing and a progress bar for each one. Because the installer is fetching various files online, this process might take a few minutes.

    If you see a Security Warning pop-up window

    Click OK.

    The installation will pause, and a Selection Needed pop-up window appears.

  11. Check the box labeled Brainwy Software; Pydev; Brainwy.

    Check before proceeding that the Install pop-up window appears as

  12. Click OK

    The installation will finish (showing the final progress bars).

    A Software Updates pop-up window will appear.

  13. Click Yes

    Eclipse will terminate and restart. As you did in step 4, terminate (click OK on) the Welcome Tab.

  14. Click Window (to the left of Help on the far right of the line below this window's blue title workspace Java - Eclipse) and then click Preferences in its pull-down menu, as shown below.
  15. Drill down to select the interpreter:
    • Disclose PyDev by clicking the + in front of PyDev or double-clicking PyDev (after the +); the + changes to a -.
    • Disclose Interpreters by clicking the + in front of Interpreters or double-clicking Interpreters (after the +); the + changes to a -.
    • Select Python - Interpreter.
    The Preferences pop-up window should appear as follows
  16. Click New... at the top-right of the top window

    A Select Interpreter pop-up window appears.

    Click Browse and the Open pop-up window should show you the folder in which Python was installed (here Python 3.6).

    Double-click python.exe (or select it and click Open).

    Change the Name in the Select Interpreter pop-up window to be simply Python36 (or whatever version of Python is installed). The Select Interpreter pop-up window should appear as

  17. Click OK.

    A Selection needed pop-up window will appear.

    Ensure that a check appears in all four checkboxes.

  18. Click OK.

    The Preferences pop-up window will be changed to

    On my system the path to the Python interpreter was so long, not all of it could be seen under Location

  19. Click OK.

    A Progress Information pop-up window will appear.

    During installation, it will show the various operations it is performing and a progress bar for each one. Eventually the installation will terminate.

    If the following pop-up window appears

    Ensure the 'Public networks, such as those in airports....' checkbox is NOT checked, and then click Allow Access.

  20. Click Window (to the left of Help on the far right of the line below this window's blue title workspace - Java - Eclipse), hover over Perspective then Open Perspective in the pull-down menu and then click Other... in the next pull-down menu.

    The Open Perspective pop-up window will appear.

  21. Double-click PyDev (third from the bottom)

    The blue label on the Eclipse window will change to workspace - PyDev - Eclipse, the Package Explorer in the upper-left tab will change to PyDev Package Explorer, and a PyDev icon will appear to the right of the Java icon.

  22. Right-click the Java icon to the left of the PyDev icon and select close

    The Eclipse workbench will now have only the PyDev icon here and will look like

  23. Locate the workspace folder created in step 3 (see C:Usersyournameworkspace) and download the courselib.zip file into this workspace and unzip it there, producing the courselib folder; it should should contain a bunch of Python module files (ending in .py). From time to time you will be asked to put other course-specific Python module files into this courselib folder; these modules will be usable in all Python projects in Eclipse.
  24. Inform Eclipse to use the courselib folder in all Python projects.
    • Select Window Preferences.
    • Disclose PyDev by clicking the + in front of PyDev or double-clicking PyDev (after the +); the + changes to a -.
    • Disclose Interpreters by clicking the + in front of Interpreters or double-clicking Interpreters (after the +); the + changes to a -.
    • Select Python - Interpreter.
    • Click the Libraries tab (leftmost, above the bottom pane)
    • Click the New Folder button (topmost, right of the bottom pane)
    • Browse to the courselib folder (added above) in the Browse for Folder pop-up window (C:Usersyournameworkspacecourselib).
    • Click the courselib folder selected, and then click OK
    • Click Apply (you will see some progress bars)
      The < />< />< b=' /> pop-up window should now appear as

      Notice a fifth entry (ending in courselib appears at the bottom of the bottom pane named System PYTHONPATH

      < />< />
    • Cick OK
  25. Terminate (click X on) the Eclipse window.
Eclipse is now installed for Python.